Last Modified: 11-29-2007 1.6 A
Service Category: Vehicle Exterior Section: Door/Hatch
Model Year: 2008 Model: Sequoia Doc ID: RM000003G16000X
Title: DOOR / HATCH: POWER BACK DOOR TOUCH SENSOR (for RH Side): INSTALLATION (2008 Sequoia)

INSTALLATION

1. INSTALL POWER BACK DOOR SENSOR RH

(a) Install the power back door sensor with 2 clips.

(b) Install the 6 screws.

(c) Connect the connector.

2. INSTALL BACK DOOR NO. 2 SERVICE HOLE COVER DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 Sequoia)+

3. INSTALL BACK DOOR TRIM BOARD ASSEMBLY DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 Sequoia)+

4. INSTALL BACK DOOR PULL STRAP DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 Sequoia)+

5. INSTALL BACK DOOR STRAP COVER DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 Sequoia)+

6. INSTALL BACK DOOR SIDE GARNISH LH DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 Sequoia)+

7. INSTALL BACK DOOR SIDE GARNISH RH DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 Sequoia)+

8. INSTALL BACK DOOR CENTER GARNISH DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 Sequoia)+

9. INSTALL POWER BACK DOOR ROD DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 Sequoia)+